manualshive.com logo in svg

Maquet 1133.02BFX, Operating Instructions Manual, Page: 42 / 44

Share
Download
Maquet 1133.02BFX Operating Instructions Manual Download Page 42

42

1133.02BX

GA113302GB11

IX. Spare parts list

6. Control modules

1009.81D0

Foot switch for height, Trendelenburg/rev., back plate

1009.81D1

Foot switch for height, Trendelenburg/rev., lateral tilt

1009.81D2

Foot switch for height, Trendelenburg/rev., leg plates

1009.81D3

Foot switch for height, Trendelenburg/rev., longit. shift

1133.90A0

Cable-connected hand control

1133.91A0

IR transmitter

3 110 26E9

Charging station EU + US + Japan

1150.95X0

Wall panel

IX. Spare parts list

You can order replacement parts under the numbers specified. For further details, please refer to the spare
parts lists.

1. Operating table

Head rest pad 1130.53B0

9092.0104

Pad for upper back plate 1133.31B0

9092.2424

Pad for lower back plate and seat plate1133.02BX

9092.2383

Leg plate pad 1133.53BC (2 pcs. always required)

9092.0204

Mains cable

for 1133 BX (230V)

3113.3659

for 1133.02 FX (110V)

3113.3669

Rechargeable battery (2 pcs. are always required)

0227.0154

2. Accessories

• Hand control with coiled cable

1133.90A0

• IR transmitter

IR transmitter without charging station

1133.91A0

Amplified IR transmitter incl. charging station (230V)

1133.91L0

System codes numbers and letters

9801.6234

Cover for leg plate 1132.65A0

9082.1223

Control line with two plugs for foot switc

0200.4273

Use only spare parts approved by MAQUET.

Summary of Contents for 1133.02BFX













































Reviews:

No comments