Maquet 1133.02BFX, Operating Instructions Manual, Page: 15 / 44

15
1133.02BX
GA113302GB11
2.5 Control via foot switch 1009.81DX (optional)
Connect the foot switch to one of the two sockets (14)
at the column head.
Three functions can be activated using the following foot
switch versions:
1009.81D0 Foot switch for height, Trendelenburg/rev.,
back plate
1009.81D1 Foot switch for height, Trendelenburg/rev.,
lateral tilt
1009.81D2 Foot switch for height, Trendelenburg/rev.,
leg plates
1009.81D3 Foot switch for height, Trendelenburg/rev.,
longit. shift
Î Î
Î Î
Î
Note
Be sure to observe the Operating instructions for
the foot switch.
2.6 Special functions
If requested, the MAQUET service personnel can set
the NEUROLOCK function at the operating table. This
function avoids adjustments of the table position due
unintentional actuation of the keys at the hand control.
a+b) The ”Neurolock” function can be unlocked by
pressing simultaneously the ”table top down” key
a and the ”table top up” key b on the control
module. The operating table can now be adjusted.
If no further keys on the control module are actu-
ated for approx. 8 sec., then the operating table
is locked again.
Adjusting the operating table again is only possi-
ble after actuating the ”table top down” a and ”ta-
ble top up” b function keys simultaneously.
Î Î Î Î Î
Note:
The ”table top up” and ”table top down” functions
cannot be actuated simultaneously using the foot
switch 1009.81X0. Use a second control module to
unlock the Neurolock function.
14
14