Page 11
NOTE:
• Place display on soft, flat surface while working.
• Do not place excessive pressure on back of the display.
• Universal washers must be installed between the head of the mounting screws and the Display
Mounting Brackets as shown.
(FIGURE C)
DISPLAY INSTALLATION (CONTINUED)
Display Mounts (2)
FIGURE C
Mounting Screws (4)
Universal
Washers (4)
Nylon Spacers
(FIGURE D)
Nylon spacers add distance between Display Mounting Brackets and display.
They will fit
all supplied screw sizes. The spacers must be used only when attaching displays which have:
• Recessed mount points
• Uneven mount points
• Any obstruction near the mount points
• A curved back
NOTE:
• Nylon Spacers must only be installed between the
Display Mounting Bracket and the display.
FIGURE D
Nylon Spacer
CAUTION!
Do not use any screw longer than the 1/8” mark or damage to the display may occur.
ATTENTION!
Ne pas utiliser des vis plus que le 1/8" marque ou dommages à l'affichage peuvent
se produire.
!
