Page 10
M8
M6
M5
M4
Dimples (Face Up)
Universal
Washer
FLAT PANEL INSTALLATION
Selecting The Mounting Hardware To Attach Brackets To Flat Panel
1. Identify the correct diameter scre
w for the flat
panel threaded inserts. The correct screws
should thread easily and not pull out when
tension is applied.
2. To determine proper screw length, insert thread
depth indicator into a threaded insert on the flat panel.
3. Mark the thread depth indicator 1/8” above the
depth of the threaded insert.
(FIGURE A)
4. Select a screw that is shorter than the 1/8” mark
made on the thread depth indicator.
NOTE:
Do not use any screw longer than the 1/8”
mark or damage to the flat panel may occur.
Universal Washers
Universal washers are designed to accommodate the various
M4, M5, M6 and M8 hole sizes found in flat panels.
(FIGURE B)
FIGURE B
Small Straw
or toothpick
Depth Plus 1/8”
Mark Allowance
Small Straw
or toothpick
Depth Plus 1/8”
Allowance Mark
FIGURE A
Thread Depth Indicator
Mark 1/8” Above Depth
NOTE:
If installing optional Camera Mount or Soundbar Mount, they must be installed prior to installing
display. Refer to instructions I-00875 for Camera Mount and I-00876 for Soundbar Mount.
