5
GENERAL SAFETY PRECAUTIONS
5.1 Instructions
Before carrying out any operation on the equipment, please read this
instruction manual carefully in all its parts.
The operator must be able to use the equipment in safety, have a suitable
psychological and physical profile, not be under the effect of drugs or alcohol and be
fully instructed on how the machine works.
The equipment must be kept out of the reach of children.
The equipment is designed to be used as described in paragraph “2.1 Intended Use”, according
to the instructions contained in the chapters "Commissioning" and "Maintenance". Any other use
is strictly forbidden.
Before connecting the machine to the electric power system, make sure that the latter is protected
by a residual-current device, according to the laws in force.
Do not leave the equipment unattended during operation, turn it off and remove the key from the
switch.
When the equipment is not going to be used, even if only for a short period of time, it is advisable
to disconnect the power supply by unplugging the machine.
In case of maintenance, disconnect the power supply by unplugging the machine at the rear.
Before carrying out any maintenance or cleaning operations, such as the connection of
handpieces, the cleaning of filters, etc., always remember to disconnect the power supply, by
unplugging the machine.
Do not alter or tamper with the equipment's safety systems.
Do not install the machine near magnetic devices (cash cards, credit cards, badges, mobile
phones).
Only use original spare parts supplied by the manufacturer.
Do not introduce any objects in the suction grilles. Do not obstruct the suction grilles under any
circumstances.
Do not use corrosive chemicals to clean the equipment.
Do not use any pointed or abrasive objects on the touch-screen control panel.
Do not use the equipment near spraying devices or sources of humidity, such as saunas,
showers, hydromassage tubs, etc.
Do not expose the equipment to direct sunlight or major sources of heat.
The machine is designed to operate in safety and is equipped with safety devices which must not
be tampered with under any circumstances.
Emergency maintenance and repair operations must be carried out
exclusively by specialised staff (technical assistance).
12