Manta MM443, User Manual

Page: 11 / 32

USer’S MANUAl
11
Specifications
LCD display
z
Automatic zero re-setting
z
Automatic switch-off
z
Overload indicator
z
Low battery indicator
z
Maximum capacity – 150KGS
z
Power Supply
Insert 1 x 9v PP3 ALKALINE battery into the battery box
underneath the scale. Only use batteries which are clearly
marked ALKALINE.
Directions for use
Weighing Mode
Place the scale on a hard, flat surface (avoid carpet). Tap
the scale platform sharply in the bottom right hand corner to
turn the scale on. The display will show “88888” then “0.0
kg” . Your scale is now ready for weighing. If no weighing
is carried out during approximately 10 seconds, the scale
switches itself off.
Stand still on the scale, distributing your weight evenly and
wait while the scale computes your weight. Your weight will
then be displayed in flashing figures, before the figures are
“locked” on the screen.
The scale will then turn itself off automatically.
Entering Personal Data
Place the scale on a hard, flat surface (avoid carpet).
Press the “ ” button to turn the scale on. The LCD will
display the height, gender and number of the memory slot.
The number of the memory slot will flash on and off.
When “1” is blinking, press the “ ” or “ ” button to choose
your own memory slot (1 - 8) and confirm your choice by
pressing “ ”.
The display now shows a male or female symbol. Select
the appropriate gender by pressing the “ ” or “ ” button
and confirm your choice by pressing “ ”.
Select your height by pressing the “ ” or “ ” button and
confirm your choice by pressing “ ”. If you the switch on the
bottom of the scale is set to kilograms the height range is
100-250cm and the graduation is 1cm.
Select your age by pressing the “ ” or “ ” button and
confirm your choice by pressing “ ”. The age range is 10-
100 and the graduation is 1 year.
Data entry is now complete. The display will show your
height, and gender again and the memory number you have
selected will continue to flash. If you would like to check that
the details you have entered are correct keep pressing the “
” button to go through them again. Otherwise press the “
” button to proceed to the body fat and water measurement
mode, or let the scale turn itself off.
When the display shows “0.0 kg” again, the scale is ready
to measure your body fat and water percentage.
The data can be modified and/or entered for additional
members of the family by repeating the above procedure.
Measuring Body Fat
Place the scale on a hard, flat surface (avoid carpet).
Press the “ ” button to turn the scale on. The LCD will dis-
play the height, gender and number of the memory slot. The
number of the memory slot will flash on and off. Press the “
” button to choose your own memory slot (1 - 8) and press
“ ” to switch to body fat and water measuring mode.
The monitor is ready for measuring body fat and water
percentage when the display shows “0.0 kg”
Remove shoes and socks, then step on the scale and
wait. Stand still on the scale, distributing your weight evenly
and wait while the scale computes your weight. Your weight
will then be displayed.
Next the display will show “ “ for a few seconds,
after which these squares will disappear one by one and
the body fat percentage and water percentage will be shown
alternately. Step off the scale to see the result. “F” indicates
the percentage of your body which is fat and “BW” indicates
the percentage of your body which is water.
The measuring range of fat percentage is 4-45%. The
graduation is 0.1%. The measuring range of water percent-
age is 37.8 - 66%. The graduation is 0.1%.
The scale will shut itself off automatically after a few
seconds of displaying the body fat and the body water per-
centage alternately.
At the same time as the body fat and body water meas-
urements are being displayed, one of five diagrams will also
be shown at the bottom of the LCD. These indicate if your
body fat percentage is:
Very low (very thin person)
z
Low (thin person)
z
Average (average person)
z
High (fat person)
z
Very high (very fat person)
z