GLASS ELECTRONIC PERSONAL SCALE
u
MM441
3
User’s Manual
Your new electronic personal scale has been designed
to accurately indicate your weight and will provide many
years of service if used correctly.
Specifications
6mm toughened safety plate glass platform
Extra large LCD display
Automatic zero re-setting
Automatic switch-off
Overload indicator
Low battery indicator
1 X 3V Lithium battery included
Maximum capacity – 150kg
Division 100g
Power Supply
1 X 3V lithium battery ( included)
Please remove the insulation sheet from the undersi-
de of the scale to activate the batteries.
Replace the batteries only when "LO" appears.
Directions for use
1. Place the scale on a hard, flat surface (avoid carpet).
2. To switch on the scale, tap the front centre of the
platform sharply with your foot and wait a few se-
conds until the zero appears on the display.
3. The scale is now ready for weighing. Step on the
scale and weigh yourself.
4. Stand still on the scale distributing your weight even-
ly and wait while the scale computes your weight.
Your weight will then be displayed.
Important!
If you step on the scale before the zero appears on the
display, the message "Err" will be displayed. If this hap-
pens, step off the scale and wait until it has switched itself
off before repeating step two.
To ensure the most accurate reading possible:
Always weigh yourself on the same scale placed on
the same floor surface. Please note that uneven flo-
ors may affect readings.
Weigh yourself without clothing and footwear, before
meals and always at the same time of day.
Units of Measurement
Your scale can show your weight in kilograms.
The smallest units of measurement are: 100g
1 kilogram = 1000g
Automatic Switch Off
When you step off the scale it will automatically switch
off. If no weighing is carried out while the zero is being
displayed, the scale switches itself off automatically after
approximately 6 seconds.
Overload Indicator
When the scale is overloaded, i.e. over its maximum ca-
pacity, the message "Err" will appear on the screen.
Low Battery Indicator
When the battery needs replacing, the message "LO"
will appear on the screen. To change the battery open the
backboard of the scale and carefully remove the battery
from the battery compartment by drawing them sideways
out from under the contacts. Do not bend the contacts
back whilst removing the battery as they may break. Ple-
ase dispose of batteries in the correct manner.
Care Instructions
Clean your scale with a damp cloth but do not allow
water to get inside the scale.
The top of this scale becomes slippery when wet -
please take care when weighing yourself.
Do not use chemical cleaning agents.
Do not allow your scale to become saturated with
water as this can damage the electronics.
Keep your scale in a cool place with dry air instead
of humid or hot place.
Keep your scale in horizontal position instead of
standing on side.
Remove the battery if the scale is not going to be
used for a long time.
Do not jump on or drop the scale.
This product can only be used by static pressure.
Avoid breaking the glass by striking, shocking or
dropping.
Keep away from the children.
