![background image](http://html.mh-extra.com/html/visionair/vision15/vision15_instruction-booklet_1032239001.webp)
Note :
Only use these function when
loading. For removal, press one or
three seconds depending on the
option selected and the star
✱
will
disappear.
OR
INSTRUCTION BOOKLET
for programming calibration of the
VISION15
INTEGRATED SCALE
for
10-12 WHEEL TRUCKS
TOTAL
32,000 KG
Front:
to select
Rear:
to select
Distributions NJCO inc.
1036, Route de Fossambault
St-Augustin-de-Desmaures QC G3A 1W8
418 624-0884
www.balancevisionair.com
|
LES BALANCES
1) DESCRIPTION OF THE
RESET
OPTION
• This function allows you to submit a load with the net weight (payload) only.
By activating this function, the balance displays zero kg or zero lbs.
• Enter the weights of the truck and semi-trailer loads separately.
• It is possible to install lights on the truck and semi-trailer to monitor the load from outside of
the truck (optional).
OTHER OPTIONS AVAILABLE ON THE
VISION15
SYSTEM
Press the
button for 3 seconds, select the (
) buttons, follow the instructions on the
monitor or confirm with the
button.
1) Empty programming: See pages 2 and 3 of this booklet; C
2) Full programming: See pages 2 and 3 of this booklet;
3) Pound or kilogram option;
4) Exterior lights option: See point 1 of this page;
5) VISION15 light option: Lights for loading directly on the display (total load);
6) Unit number option: To identify the truck no. and the no. of the wireless LiberT (optional);
7) Manual calibration;
8) Contrast;
9) Auto On-Off;
10) PSI DIsplay;
11) 10 or 100 kg/lb option: Displays every 10 or 100 kg or lbs.;
12) Language;
13) Password option: Blocks access to the system calibration;.
Programming procedure for exterior lights
Note - Net:
maximum load weight (light will stay on).
Fast:
weight at which the light will flash rapidly.
Slow:
weight at which the light will flash slowly.
Identification
press
half-second
10 to 12 wheel
selection mode
Menu
Press 3 sec.
VISION15
Light
P : PSI Air pressure
Axial weight
Total weight
On / Off Press
3 sec.
Light mode and reset
Press 3 sec. and
a star will appear *
(See point
1
page 4)*
Press for 3 seconds
Select
Confirm
On/Off
Press
VISION15
light for a
half‑second
Loading mode
Correction of empty trck
weight. Press for 1 second
and a star will appear *
SLOW
SLOW
FAST
FAST
NET
NET
EXTERIOR LIGHT
Hold
to save
Hold
to save