1.Take out the screws
with a screwdriver by
turning counter
clockwise.(Pic.23)
4.Connect the motor
wire of the new foot
stand to the power
wire plug.(Pic.26)
5.Install the foot
stand to the main
body of the quad-
copter.(Pic.27)
6.Lock the foot stand
with screws.(Pic.28)
2.Pull out the foot
stand.(Pic.24)
3.Unplug the motor
wire from the
power wire plug.
(Pic.25)
How to change the foot stand
Install the holder of the mobile phone
1.Connect the stand
bar to the mobile
phone fixing
component.(Pic.29)
2.Adjust the fixing
component upward
or downward
according to the
size of the mobile
phone.(Pic.30)
3.Set the mobile
phone holder to
the top of the
remote control.
(Pic.31)
1.Pull back the lock center of the stand bar and
slowly push up the holder, the mobilephone
holder would be taken down.(Pic.32)
Remark:
Pic.23
Pic.24
Pic.25
Pic.26
Pic.27
Pic.28
Pic.29
Pic.32
Pic.30
Pic.31
U
ser’s Manual
EN
3
0
