4. Use current knob to adjust current for A1, press
current knob
to confirm new
setting.
5. Use
voltage knob
to adjust time duration in seconds for t1, press
voltage
knob
to confirm new settings.
6. Repeat above steps for P2 and P3.
7. To set the number of cycles.
After t3 of P3 has been set and confirmed, the
P icon
will then appears and ready
for setting of number of cycles.
Adjust the
voltage knob
to set the number of cycles from 1 to 999***.
To double check the Timed Program Cycle Settings.
To Check the settings of Timed Presets before cycle run starts.
Just repeat procedure from 1 to 5 and take note of each setting.
To run the Timed Program cycle
