Remarks :
The three Timed Presets share the same Icon of the single V & I Presets. But they
have run time settings and a cycle setting. The power supply can thus be
programmed to operate from one Timed Preset which runs for a set time period
and moves to the next lot of Timed Presets.
When the power supply is in cycle operation the cycle icon
flashes with the
time preset in operation.
Setting the Timed Presets
1. Push Button (4) to Output “OFF” position, check display to confirm.
2. Press and hold the voltage knob for about 5 seconds to enter into the setting
mode with flashing “Preset Icon” as shown below.
3. Use voltage knob to adjust voltage for U1, press voltage knob to confirm new
setting.
