Manson Engineering Industrial KPS-6000 Series, User Manual

Page: 4 / 28

1.4 Operation Environmental Condition:
10-80% R.H.
Altitude up to 2000m
Installation category: CAT 2
Pollution degree: 2
Mains supply voltage fluctuation up to ±10% of the specified operating voltage.
2. ACCESSORIES
a. AC Power cord
b. CDROM include user manual, USB driver and PC control software
c. Output cable with right angle safety plug and crocodile clip
d. USB cable
3. INTRODUCTION
This KPS series of switching mode remote programming power supplies provide power
test wave forms from the versatile 10 Steps generator which can simulate common test
conditions for electronic devices. In addition to the supplied USB communication
interface, an optional Ethernet interface card allows users to configure, control, or
monitor basic power supply settings over the internet. KPS uses SCPI (Standard
Commands of Programmable Instruments) syntax for easy system integration with test
equipment. 4-digits display provide 10mV and 10mA resolution. Three user adjustable
presets of voltage and current values can be saved for quick recall from the front panel
buttons. User adjustable upper voltage and current limits make it extra safe for delicate
and sensitive test piece. Output On-Off button and the Key Lock button allow safe and
convenient operation. Analogue Remote Control of voltage, current and Output On-Off
provide additional flexibility in the control of the power supply. It is ideal for laboratory,
university, work shop, production, quality control and advanced DIY applications.
P.4