Manitowoc NEO, Technician'S Handbook

Page: 35 / 136

Part Number STH042 3/14 35
Step 7 Mix a solution of sanitizer and warm water.
Use half of the sanitizer/water solution to sanitize all
removed components. Use a spray bottle to liberally
apply the solution to all surfaces of the removed parts
or soak the removed parts in the sanitizer/water
solution. Do not rinse parts after sanitizing.
Step 8 Use half of the sanitizer/water solution to
sanitize all foodzone surfaces of the ice machine and
bin. Use a spray bottle to liberally apply the solution.
When sanitizing, pay particular attention to the
following areas:
•
Evaporator plastic parts - including top, bottom and
sides
• Bin bottom, sides and top
Do not rinse the sanitized areas.
Step 9
Replace all removed components, wait 10
minutes, then reapply power and water to the ice
machine
Step 10 Press the Clean button. Water will flow
through the water dump valve and down the drain.
Wait until the water trough refills, then add the proper
amount of ice machine sanitizer to the water trough.
Wait until the sanitize cycle is complete (approximately
22 minutes) then press the Ice button to start ice
making.
Solution Type Water Mixed With
Sanitizer 3 gal. (12 l) 2 oz (60 ml) sanitizer
Model Amount of Sanitizer
U0140 1 ounces (30 ml)
U0190 2 ounces (60 ml)
U0240 2 ounces (60 ml)
U0310 2 ounces (60 ml)