Manitowoc NEO, Technician'S Handbook

Page: 41 / 136

Part Number STH042 3/14 41
Preventative Maintenance Cleaning
This cleaning procedure can be performed
between the bi-annual cleaning and sanitizing
cycles. This procedure does not require
removing the ice from the bin.
Step 1 Press the On/Off button after ice falls from the
evaporator at the end of a Harvest cycle. Or, press the
On/Off button and allow the ice to melt off the
evaporator.
.
Step 2 To start a cleaning cycle, press the Clean
button. Water will flow through the water dump valve
and down the drain. Wait until the water trough refills,
then add the proper amount of ice machine cleaner to
the water trough.
Wait until the clean cycle is complete (approximately
22 minutes) then press the On/Off button.
!
Caution
Never use anything to force ice from the
evaporator. Damage may result.
! Warning
Wear rubber gloves and safety goggles
(and/or face shield) when handling Ice
Machine Cleaner or Sanitizer.
Model Amount of Cleaner
U0140 2 ounce (60 ml)
U0190 5 ounces (150 ml)
U0240 5 ounces (150 ml)
U0310 5 ounces (150 ml)