Manitowoc Grove GRT8120 Operator'S Manual Download Page 433

Page: 433 / 448

Published 3-22-2021, Control # 702-02

A-3

DANGER

CRUSHING HAZARD

• Death or serious injury could result

from being crushed by moving machinery

or by improper set-up on outriggers.

• Ensure all pins and floats are

properly installed and the outrigger

beams are properly extended before

lifting on outriggers.

• Stand clear while outriggers are being

extended or retracted.

737601

1087

DANGER

CRUSHING HAZARD

• Death or serious injury could result

from being crushed by moving machinery

or by improper set-up on outriggers.

• Ensure all pins and floats are

properly installed and the outrigger

beams are properly extended before

lifting on outriggers.

• Stand clear while outriggers are being

extended or retracted.

737601

1087

THIS CRANE IS NOT INSULA

TED.

VOID DEA

TH OR SERIOUS INJUR

Keep

ALL

parts of the crane, rigging and load at least 20 feet

(6 meters) away from any energized power line.

ou MUST

follow the OSHA

requirements set forth in 29CFR 1926.1407

through 1926.141

This crane is not designed or equipped for use within 10 feet

(3 meters) of energized power lines [Refer to 29CFR1926.1410

able

A]. If operation within 10 feet (3 meters) of any power

lines cannot be avoided, the power utility MUST be notified

and the power lines MUST be de-energized and grounded

BEFORE performing any work.

If contact is ever accidentally made with a power line and any

part of this crane, its rigging or load, NEVER touch the crane

or even approach or come near the crane.

Electrocution CAN OCCUR even without direct contact with

the crane.

DANGER

80037260

ELECTROCUTION HAZARD

THIS CRANE IS NOT INSULA

TED.

VOID DEA

TH OR SERIOUS INJUR

Keep

ALL

parts of the crane, rigging and load at least 20 feet

(6 meters) away from any energized power line.

u MUST

follow the OSHA

requirements set forth in 29CFR 1926.1407

through 1926.141

This crane is not designed or equipped for use within 10 feet

(3 meters) of energized power lines [Refer to 29CFR1926.1410

ble

A]. If operation within 10 feet (3 meters) of any power

lines cannot be avoided, the power utility MUST be notified

and the power lines MUST be de-energized and grounded

BEFORE performing any work.

If contact is ever accidentally made with a power line and any

part of this crane, its rigging or load, NEVER touch the crane

or even approach or come near the crane.

Electrocution CAN OCCUR even without direct contact with

the crane.

DANGER

80037260

ELECTROCUTION HAZARD

7376102532

Fire from flammable fuel

can cause serious injury

or death.

No smoking, sparks or

open flame during fueling.

DANGER

DIESEL

737601

1062

DANGER

7376102946

avoid death or serious injury:

Never mix gasoline, alcohol, or gasohol

with diesel fuel. This mixture can cause

an explosion.

Use only ultra low sulfur fuel. Failure to

do so may cause damage to the catalyst.

80021918

USE ISO 22241-1

QUALITY

DIESEL

EXHAUST FLUID

(DEF) ONL

2XR 36

2X R11.5

80116980

CUT

OUT

avoid possible engine fault

codes and undesirable

operation, ensure the keyswitch

has been off 2 minutes before

disconnecting batteries.

Disconnect batteries, if machine

will be inactive for over 24

hours.

7376102819

CAUTION

7376102554

Explosive gases can

cause serious injury or

death.

Keep sparks, open flame,

and lighted material away

DANGER

CAUTION

80030034

Hot surface and

gases can cause

serious injury.

Keep clear while

red light is flashing

and allow to cool

before touching.

7376102349

ELECTRONICS DAMAGE

Welding can cause electronic

component damage.

Obtain Manufacturer's

approval before any welding.

See service manual.

CAUTION

80025216

Attention

Special lubricant has been installed in

this component. For more information

please refer to lubrication decal on

Hydraulic Reservoir or lubrication chart

in Operator's Manual.

80025216

Attention

Special lubricant has been installed in

this component. For more information

please refer to lubrication decal on

Hydraulic Reservoir or lubrication chart

in Operator's Manual.

80127100

CAUTION

TTER

CONNECTION

TTER

DISCONNECT

SWITCH

prevent damage to electronics, consult Service Manual before

disconnecting cables. In order: Ensure key switch has been off 2

minutes, Battery disconnect is in the off position, Remove ECM

power fuse, Remove negative cables, Remove positive cables.

ARTER (-)

ENGINE

BLOCK GROUND

STUD

WIRE 2351

WIRE 1358

FRAME

GROUND

DISTRIBUTION

BOX

7 POSITION FUSE BOX

WIRES IN

80127149

80A

100A

125A

DISC

#1274

#2095

#1292

#151

FROM

WIRE

80127154

PRESSURE

SPRA

INSIDE BA

TTER

BOX DOOR

INSIDE HINDGED

FUSE BOX COVER

OUTSIDE HINDGED

FUSE BOX COVER

TTER

BOX FUSE

AND RELA

80129231

20A

15A

30A

15A

K108

K109

15A

KS2

GND

KS1

CCM1

KS1

IOL31

2095

1358

CAN-B

J1939

1412/2321

8.5VDC

RESIST

SPLICE

PLICE

15A

10A

15A

F105

F104

F103

F102

F101

15A

F106

F1 - Fused Battery Power

F2 - UE+ Carrier CCM1

1/IOL31

F3 - Engine ECM Power

F4 - Diagnostic T

ol Power

F5 - Cold W

ather Power

F6 - Cold W

ather Power

F7 - UB+ Carrier CCM1

1/IOL31

F8 - UB+ Carrier CCM1

1/IOL31

F101 - DEF Lines Heater Fuse Relay Power

F102 - DEF Lines Heater Fuse Relay Coil

F103 - DEF Supply Module Fused Power

F104 -

Aftertreatment Sensor Relay Power

F105 - Starter Lockout Relay Power

F106 - Outrigger light Relay Power

D1 - Pressure Line Heater

D2 - T

turn Line Heater

D3 - Suction Line Heater

K108 - Starter Lockout Relay

K109 - Def Lines Heater Relay

10 - Def Supply Module

Aftertreatment Sensors Power Relay

12 - Outrigger Lighting

13 - Ignition Power Relay

K301

AIR HEA

TER

RELA

K302

ENGINE

ART

RELA

132

205

148

403

401

402

131

130

137

142

130

132

205

149

152

136

151

135

140

401

402

801

13724 B2

FIGURE A-1 continued

10087-2

Summary of Contents for Grove GRT8120

































































































































































































































































































































































































































































Search results

Summary of Contents for Grove GRT8120

Reviews:

Brands by name

Popular brands

Manitowoc Grove GRT8120, Operator'S Manual

Search results

Summary of Contents for Grove GRT8120

Reviews:

Brands by name

Popular brands