Manitowoc Grove GMK 5200-1 Maintenance Manual Download Page 301

Page: 301 / 346

Maintenance work on the superstructure

8.13 Air conditioning system

201

Maintenance manual

3 302 746 en

8 - 77

GMK5200-1

8.13

Air conditioning system

8.13.1

Checking the air conditioning system

•

Check the air-conditioning system in the same way as when checking it on
the carrier;

Checking the air conditioning system

, p. 7 - 131.

8.13.2

Cleaning the condenser fins

Depending on the power of the air-conditioning system (3 KW or 6 KW),
different condensers are installed (type

•

Switch the air conditioning system off.

•

Clean the condenser fins (

) with com-

pressed air.

M 1

Risk of damage to the condenser.

Do not use a high pressure cleaner or steam jet cleaner. The powerful jet
may damage the fins. Use only compressed air for cleaning.

Summary of Contents for Grove GMK 5200-1



























































































































































































































































































































































Search results

Summary of Contents for Grove GMK 5200-1

Reviews:

Brands by name

Popular brands

Manitowoc Grove GMK 5200-1, Maintenance Manual

Search results

Summary of Contents for Grove GMK 5200-1

Reviews:

Brands by name

Popular brands