Manitowoc Grove GMK 5200-1 Maintenance Manual Download Page 270

Page: 270 / 346

Maintenance work on the superstructure
8.6 Hydraulic system

8 - 46

3 302 746 en

Maintenance manual

GMK5200-1

201

Establishing the
operating
conditions

After having changed the oil filters and topping up the oil, you must
re-establish the operating conditions.

Opening the valve

•

Open the valve – lever (

) parallel to the line.

•

Start the engine.

•

Carry out all hydraulic functions several times to remove any air in the
system.

•

Check that none of the oil filters is leaking.

•

Check the oil level through the inspection glass on the hydraulic oil tank.
Top up oil, if necessary;

p. 8 - 45.

Risk of damage to the hydraulic pumps.

Open the valve prior to starting the engine.
This prevents damage to the hydraulic pumps.

Summary of Contents for Grove GMK 5200-1



























































































































































































































































































































































Search results

Summary of Contents for Grove GMK 5200-1

Reviews:

Brands by name

Popular brands

Manitowoc Grove GMK 5200-1, Maintenance Manual

Search results

Summary of Contents for Grove GMK 5200-1

Reviews:

Brands by name

Popular brands