manualshive.com logo in svg

Manitou MT 1058 R PRIVILEGE, Manual

The Manitou MT 1058 R PRIVILEGE is a top-of-the-line telehandler designed for exceptional performance and versatility. With a lifting capacity of 5.8 tons and a maximum reach of 10 meters, this machine is perfect for all your heavy lifting needs. Download the user manual for free from manualshive.com to get the most out of this powerful equipment.

Share
Download
background image

3-17

B4 - TRANSMISSION UNIVERSAL JOINT

GREASE

Clean and lubricate the following points with grease 
(see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) and 
remove the surplus of grease.

1 - Lubricators of the universal joint Transmission/ 

Front axle (3 lubricators) (fig. B4/1).

2 - Lubricators of the universal joint Transmission/ 

Rear axle (3 lubricators) (fig. B4/2).

B4/1

1

1

1

B4/2

2

2

2

Summary of Contents for MT 1058 R PRIVILEGE












































































































































Reviews:

No comments

Related manuals for MT 1058 R PRIVILEGE

Lull 0160003882 Owner'S/Operator'S Manual preview
0160003882
Brand: Lull Pages: 200
TEREXLIFT TELELIFT 3713 Elite Workshop Manual preview
TELELIFT 3713 Elite
Brand: TEREXLIFT Pages: 208

Brands by name

Popular brands

Load more brands