Manitou MLT 845 120 LSU 3-E3 Series, Operator'S Manual

Page: 100 / 128

3-25 3-25
D6/1 D6/1
1 1
D6/2 D6/2
2 2
D5/1 D5/1
1 1
D5/2 D5/2
2 2
D5 - FUEL FILTER D5 - FUEL FILTER
CHANGE CHANGE
- Open engine hood and lift the battery cover. - Open engine hood and lift the battery cover.
- - Carefully clean the outside of Carefully clean the outside of the filter and its holder the filter and its holder , to prevent dust from getting into , to prevent dust from getting into
the system. the system.
- - Place a container under the fu Place a container under the fu el filter 1 (fig. D5/1) and el filter 1 (fig. D5/1) and undo the filter undo the filter . .
- - Fill up the new fuel filter (see: 3 - MAINTENANCE: FIL Fill up the new fuel filter (see: 3 - MAINTENANCE: FIL TERS AND BEL TERS AND BEL TS) with clean diesel. TS) with clean diesel.
- - Refit the filt Refit the filt er onto its holder er onto its holder . .
Tighten the fuel filter by hand pressure only and lock the filter in place by a quarter turn. Tighten the fuel filter by hand pressure only and lock the filter in place by a quarter turn.
- - Pressurise the circuit by means of Pressurise the circuit by means of the hand pump 2 (fig. D5/ the hand pump 2 (fig. D5/ 2). 2).
- Remove the container from under the - Remove the container from under the filter. filter.
- Start up the I.C. engine and make sure there is no leakage. - Start up the I.C. engine and make sure there is no leakage.
D6 - GEAR BOX OIL FILTER D6 - GEAR BOX OIL FILTER
CHANGE CHANGE
- Remove the cover plate 1 - Remove the cover plate 1 (fig. D6/1). (fig. D6/1).
- Unscrew and discard gear box oil filter 2 (fig. D6/2). - Unscrew and discard gear box oil filter 2 (fig. D6/2).
- Carefully clean the filter head with a clean, lint-free cloth. - Carefully clean the filter head with a clean, lint-free cloth.
- Slightly lubricate the new - Slightly lubricate the new seal and fit the seal on seal and fit the seal on the filter. the filter.
- - Fill up the new gear box oil filter (see: 3 - Fill up the new gear box oil filter (see: 3 - MAINTENANCE: FIL MAINTENANCE: FIL TERS CARTRIDGES AND TERS CARTRIDGES AND
BEL BEL TS) with oil TS) with oil (see: 3 - MAINTENANCE: (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL). LUBRICANTS AND FUEL).
- Refit the filter, making sure that the seal - Refit the filter, making sure that the seal is correctly positioned and is correctly positioned and tightened. tightened.
Tighten the gear box oil filter by hand pressure only and lock the filter in place by a quarter turn. Tighten the gear box oil filter by hand pressure only and lock the filter in place by a quarter turn.
- Put back the cover plate - Put back the cover plate 1 (fig. D6/1). 1 (fig. D6/1).
https://www.forkliftpdfmanuals.com/