Manitou MLT 845 120 LSU 3-E3 Series, Operator'S Manual

Page: 96 / 128

3-21 3-21
C5 C5
2 2
1 1
C6 C6
2 2
1 1
C7 C7
1 1
C5 - AIR C5 - AIR CONDITONING FIL CONDITONING FIL TER (OPTION AIR TER (OPTION AIR CONDITIONING) CONDITIONING)
CHANGE CHANGE
- Lift up protective casing - Lift up protective casing 1 (fig. C5). 1 (fig. C5).
- - Lift out the air conditioning filter 2 (fig. C5) and fit new replacement f Lift out the air conditioning filter 2 (fig. C5) and fit new replacement f ilter (see: 3 - ilter (see: 3 -
MAINTENANCE: FILTERS CARTRIDGES AND BELTS). MAINTENANCE: FILTERS CARTRIDGES AND BELTS).
- Refit the protective casing. - Refit the protective casing.
C6 - FRONT AND REAR C6 - FRONT AND REAR AXLE DIFFERENTIAL OIL LEVEL AXLE DIFFERENTIAL OIL LEVEL
CHECK CHECK
Place the lift truck on level ground with the I.C. engine stopped. Place the lift truck on level ground with the I.C. engine stopped.
- Remove level plug 1 (fig. C6). The oil should be flush with the edge of the hole. - Remove level plug 1 (fig. C6). The oil should be flush with the edge of the hole.
- - If necessary, add oil (see: 3 - M If necessary, add oil (see: 3 - M AINTENANCE: LUBRICANTS AND FUEL) by t AINTENANCE: LUBRICANTS AND FUEL) by t he filler port 2 he filler port 2
(fig. C6). (fig. C6).
- Replace and tighten the level plug 1 (fig. C6) (tightening torque 34 to 49 N.m). - Replace and tighten the level plug 1 (fig. C6) (tightening torque 34 to 49 N.m).
C7 - FRONT AND REAR WHEELS REDUCERS OIL LEVEL C7 - FRONT AND REAR WHEELS REDUCERS OIL LEVEL
CHECK CHECK
Place the lift truck on level ground with the I.C. engine stopped. Place the lift truck on level ground with the I.C. engine stopped.
- Check the level on - Check the level on each front wheel reducer. each front wheel reducer.
- Place level plug 1 (fig. C7) in the horizontal position. - Place level plug 1 (fig. C7) in the horizontal position.
- Remove the level plug, the oil should be flush with the edge of the hole. - Remove the level plug, the oil should be flush with the edge of the hole.
- - If necessary, add oil (see: If necessary, add oil (see: 3 - MAINTENANCE: LUBRICANTS 3 - MAINTENANCE: LUBRICANTS AND FUEL) by the same hole. AND FUEL) by the same hole.
- Replace and tighten the level plug 1 (fig. C7) (tightening torque 34 to 49 N.m). - Replace and tighten the level plug 1 (fig. C7) (tightening torque 34 to 49 N.m).
- Repeat this operation on each rear - Repeat this operation on each rear wheel reducer. wheel reducer.
https://www.forkliftpdfmanuals.com/