Manitou 260 TJ, Instruction Manual

Page: 89 / 138

2-49
RESCUE PROCEDURE
- This paragraph describes the procedures to follow, the controls to use in the event of a problem (breakdown of the lifting platform or
someone trapped in the basket) while the lifting platform is working.
- When taking over the machine and regularly afterwards, the details of this procedure must be read and fully understood by the operator
and everyone whose duties are centred on activities in contact with the machine.
I
N THE EVENT OF THE OPERATOR FALLING ILL
- In the case where the user is taken ill or finds themselves unable to manoeuvre, the person on
the ground can take control of the lifting platform from the backup and maintenance control
panel.
- Follow the instructions below.
- Turn switch 1 (Fig. A) to position A and hold it in place in order to take control of the lifting
platform movements.
- Lower the lifting platform using the base controls.
• FROM THE PLATFORM No. 950065
- In the case where the user accidently triggers the basket emergency stop, the person on the
ground can take control of the lifting platform from the backup and maintenance control
panel.
- Follow the instructions below.
- Turn switch 1 (Fig. A) to position A and hold it in place in order to take control of the lifting
platform movements.
- Restart the engine 2 (Fig. A).
- Lower the lifting platform using the base controls.
Pay attention to any constructions or objects that may be under the lifting
platform.
I
N THE EVENT OF AN ACCIDENT OR BREAKDOWN
–
RESCUE SYSTEM
E
LECTRICAL BREAKDOWN
- When an accident or breakdown occurs, which makes the electrical control boxes unusable,
the machine has systems for performing all the machine’s movements manually.
- Raise the turret’s right-hand cowl and locate the manual repair control components (See Fig.
C):
• Ref. 19: emergency pump button.
• Ref. 53: manual repair controls on the proportional distributor,
• Ref. 54: emergency valve on the distributor,
• Ref. 55: manual repair control lever.
- Manual repair from the distributor 53 (Figs. B and E):
• Take the lever 55 (Fig. B) and position it on one of the proportional distributor’s components
(Fig. D) depending on the desired movement (See Fig. E).
• To perform a manual repair movement, press the button 19 (Fig. C) to activate the
emergency pump and simultaneously push the lever simultaneously 55 (Fig. D) upwards
or downwards, depending on the desired movement (Fig. E).
NB: Please refer to the sticker in Fig. E to learn how the manual repair movements are assigned
on the proportional distributor.
- Manual repair from the emergency valve 54 (Fig. B):
• To manually lower the lower arm – telescope – basket compensation assembly, pull the
emergency valve 54 and simultaneously press the emergency pump activation button
19 (Fig. C) for 5 seconds, then release the button while holding the emergency valve 54
pulled towards you.
During these operations, the system does not control:
- The tilt safety system.
- The basket overload system
NB: please refer to the sticker in Fig. F for the assignment of the manual repair movements for
the arm-telescope-basket compensation assembly.
A
B
D
1
A
C
19
53
54
19
55
55
2
647382 EN (01/02/2015)