Manitou 260 TJ, Instruction Manual

Page: 104 / 138

3-10
MAINTENANCE TABLE 260 TJ - 280 TJ
(1):COMPULSORY OVERHAUL AFTER 500 HOURS or 6 MONTHS
This overhaul must compulsorily be performed after approximately the first 500 hours of operation or 6 months after the machine is put into service (when the
earlier of the two periods is reached).
(2):The internal-combustion engine oil and its oil filter must be replaced after the first 50 hours of operation, and subsequently every 500 hours of operation.
A = REGULATE, C = CHECK, G = GREASE, N = CLEAN,
P = BLEED, R = REPLACE, V = DRAIN
PAGE
(1)
DAIL
Y OR
EVER
Y 10 HOURS
OF OPERA
TION
EVER
Y 50 HOURS
OF OPERA
TION
EVER
Y 250 HOURS
OF OPERA
TION
EVER
Y 500 HOURS
OF OPERA
TION
OR 6 MONTHS
EVER
Y 1000 HOURS OF
OPERA
TION
OR 1
YEAR
EVER
Y 2000 HOURS OF
OPERA
TION
OR 2
YEARS
EVER
Y 40000 HOURS
OF OPERA
TION
OC
CASIONAL
IC ENGINE
Engine oil
(2) 3-13/3-31 V/R C <<< <<< V/R <<< <<< <<<
Coolant 3-13/3-35 C C <<< <<< <<< <<< V/R <<<
Fuel level 3-13 C C <<< <<< <<< <<< <<< <<<
Fuel circuit hose 3-15/3-37 C <<< <<< <<< <<< <<< P
Radiator core 3-17 N N <<< <<< <<< <<< <<<
Dry air filter cartridge 3-18/3-26 R N <<< R <<< <<< <<<
Alternator/crankshaft/fan belt tension
3-17/3-24/3-30
C/A C C/A R <<< <<< <<<
Cooling circuit 3-23 C C <<< <<< <<< <<<
Fuel filter 3-24 N N R <<< <<< <<<
Fuel filter cartridge (2) 3-24/3-26 R N R <<< <<< <<<
Engine oil filter (2) 3-31 R R <<< <<< <<<
Fuel tank 3-32 V/N <<< <<<
Dry air filter safety cartridge 3-32 R <<< <<<
Engine silentblocks 3-34 C** <<< <<<
Engine speeds 3-34 C** <<< <<<
Valve sets 3-34 C** C** <<< <<<
Injectors 3-36 C <<<
Radiator 3-36 C** <<<
Water pump and thermostat 3-36 C** <<<
Alternator and starter 3-36 C** <<<
Fuel injection pressure 3-36 C** <<<
Turbocompressor 3-36 C** <<<
Injection pump 3-36 C** <<<
TRANSMISSION
Brakes
3-12/3-30 C C <<< <<< C <<< <<< <<<
Axles 3-16 G G <<< <<< <<< <<< G/C**
Tightness of the universal joint bolts 3-28 C C <<< <<< <<< <<<
Hydrostatic transmission circuit pressure 3-33 C** <<< <<<
Start of hydrostatic transmission control 3-33 C/A* <<< <<<
TYRES
Condition of the wheels and tyres
3-14 C C <<< <<< <<< <<< <<< <<<
Tightness of the wheel nuts 3-20 C** <<< <<< <<< <<<
Wheels 3-38 R
LIFTING STRUCTURE
Telescope adjustment
3-20 C <<< <<< <<< <<<
Brake reducer on the turret reduction gear 3-21/3-29 C V/R <<< <<< <<<
Tightness of the bolts on the turret rotation motor 3-28 C <<< <<< <<<
HYDRAULIC SYSTEM
Hydraulic oil
3-14/3-28/3-36
C C <<< <<< V/R <<< <<< <<<
Hydrostatic transmission oil filter cartridge 3-27 R R <<< <<< <<<
Auxiliary oil filter cartridge 3-27 R <<< <<< <<<
Condition of the hoses 3-28 C** <<< <<< <<<
Hydraulic circuit strainer 3-34 N <<< <<<
Hydraulic movement speeds 3-34 C** <<< <<<
Condition of the cylinders (leaks, rods) 3-34 C** <<< <<<
Hydraulic oil reservoir 3-36 N <<<
Hydraulic circuit pressures 3-36 C** <<<
Hydraulic circuit flows 3-36 C** <<<
647382 EN (01/02/2015)