Manitou 260 TJ, Instruction Manual

Page: 124 / 138

3-30
D12 - TIGHTENING THE BOLTS ON THE TURRET ORIENTATION CROWN GEAR
CHECK
- The tightness of the screws must be checked at the latest after 50 hours of operation. This
check must then be repeated every 500 hours of operation.
- The tightening torque for the screws is 18,4 daN.m ± 10 %.
D13 - BRAKING
CHECK
- Check the braking system by disconnecting the coil 1 (Fig. D13/1 and D13/2) from the hydraulic
unit on the chassis (to access the unit, remove the casing on the left-hand side of the chassis)
and make a translation movement.
The lifting platform must not move forward.
- After the test, reconnect the coil.
D14 - ALTERNATOR/FAN/CRANKCASE BELT
REPLACE
- Open the left-hand cowl.
- Loosen the bolts 1 (fig. D14) two or three turns.
- Swivel the alternator assembly to free the belt and the replace it with a new one (see: 3 -
MAINTENANCE: FILTER ELEMENTS AND BELTS).
- Adjust the tension between the crankcase and alternator pulleys.
- Under thumb pressure (98 N), the tension should be 7 to 9 mm (Rep. A-Fig. D14)
- Retighten the bolts 1 (Fig. D14).
Recheck the belt tension after the first 20 hours of operation.
D13/2
D13/1
1
1
D14
1
A
1
647382 EN (01/02/2015)