Manitou Systems 160 ATJ, Operator'S Manual

Page: 64 / 131

2 - 36
29 - A
XLE ALIGNMENT LEDS
29A FRONT WHEEL ALIGNMENT
- This indicator light illuminates when the front wheels are correctly aligned
with the axis of the machine.
29B REAR WHEEL ALIGNMENT
- This indicator light illuminates when the rear wheels are correctly aligned
with the axis of the machine.
Before changing the steering mode (selection 1: sideways; selection 2: 2-
wheel drive; selection 3: 4-wheel drive), you must align the wheels
correctly with the machine's axis.
Align the front wheels first: selection 1 or 3.
Then align the rear wheels: selection 2.
30 - A
UDIBLE ALARM CONTROL BUTTON
When you press button 30, the audible alarm (18) sounds.
31 - D
IFFERENTIAL LOCKING CONTROL BUTTON
NB : This command must only be used during travel
The differential lock enables the 4 driven wheels to turn at the same
speed.
- To use this, press button 31: to disconnect it, release the button and
note a stop in travel.
- Preferably use the differential lock when keeping the wheels in the
machine's axis.
32 - L
OW FUEL INDICATOR
This indicator light illuminates when the fuel level is low.
NB : When the signal light comes on, there are about 5 hours of
autonomy remaining.
31
32
29B
29A
30