Manitou Systems 160 ATJ, Operator'S Manual

Page: 26 / 131

1 - 20
I
NTRODUCTION
- Our access platforms have been designed for easy handling by the operator and maximum maintenance easiness for
the mechanic.
- However, before commencing to operate the access platform, the user should carefully read and understand the
various chapters of this manual which has been provided to solve driving and maintenance problems. By following
these instructions the user will be able to take full advantage of the versatility of this access platform.
- The operator must familiarize himself with the positions and functions of all the controls and instruments before
operating the access platform.
Do not attempt to start a new access platform before the following checks have been carried out :
L
UBRICATION
- Check that all the correct grades of oils and greases that are required are available (See chapter : SERVICING
SCHEDULE) and top up if necessary.
For operation under average climatic conditions, i.e. : between - 15°C and + 35°C, correct levels of lubricants in all the
circuits are ensured in works. For operation under more severe climatic conditions, before starting up, it is necessary to
drain all the circuits, then ensure correct levels of lubricants using lubricants properly suited to the relevant ambient
temperatures. It is the same for the cooling liquid (Contact your dealer for information, if necessary.)
A
IR FILTER
- Ensure that the air filter is undamaged and not choked.
- Tighten the fastening devices if necessary.
Never use the platform with no air filter or with a damaged air filter.
C
OOLING SYSTEM
- Never start up the platform without first checking the level of the cooling liquid or when the fan belt is damaged or
broken.
H
YDRAULIC SYSTEM
- Check by a visual examination that there are no leaks or oil oozing in the hoses, connections and unions. If necessary,
tighten or control the defective connections.
- Also check that the tank oil level is correct.
BEFORE STARTING UP A PLATFORM FOR THE 1ST TIME