Airflo
12
6
Maintenance
- fig.
5
The Airflo 12 has been designed to be maintenance
free and apart from replacing the battery, the Airflo
12 contains no other user serviceable parts.
Battery replacement:
•
Turn the Airflo
12
onto its end containing the
air outlet socket, remove the screw (
A
) and
slide the end panel (
B
) away from the housing.
•
Disconnect the wire from the battery pack
and remove the battery pack from the battery
compartment.
•
Fit the replacement battery pack, ensuring that
the connector is secure, refit the end panel and
secure the screw (
A
).
A
B
5
Disposal
When the Airflo
12 has reached the end of it’s working life, remove the battery for safe disposal
in accordance with local regulations, and dispose of the Airflo
12
at your local household waste
recycling centre (civic amenity site).
Cleaning
Unless contamination is suspected, periodic cleaning is all that is recommended. The Airflo
12
should be cleaned/disinfected as follows:
•
Unplug the Airflo
12
from the battery charger. Clean the external surfaces using a non abrasive
damp cloth with warm water. Wipe dry thoroughly with a dry towel before reconnecting to the
battery charger. Do not allow moisture to enter any part of the compressor.
•
Do not use solvent-based products.
Disinfecting
•
Pre-clean using a damp cloth and then disinfect using a hard surface alcohol impregnated wipe.
Storage
•
When not in use, store in a dry place together with these instructions. To maintain the batteries,
when being stored for long periods, put the Airflo
12 on charge for 16 hours every 3 months.
NOTE: Ensure that the batteries are fully charged before storing the Airflo
12 for long periods.
When it becomes apparent that the Airflo
12
is producing fewer than expected lifting cycles, the
battery is probably reaching the end of its working life and should be replaced.
If a fault should develop or if you require assistance in setting up using or maintaining the equipment,
please contact our Customer Service Department on
Freephone 0800 2800 485
(UK only. Outside
of the UK please contact your supplier).