background image

Simple solutions for everyday independence

Airflo 

12

7

Trouble shooting guide

Compressor  does  not  run  when  ‘up’  is 

selected on the 2-way hand control.
Ensure that the air hose from the product 

being inflated is connected to the Airflo.

Compressor keeps stopping when trying 

to inflate the lifting aid.

Check  that  there  are  no  kinks  in  the  air 

hose.

Airflo 12

Weight: 

3.7Kg  (8 lbs)

Output pressure: 

0.25 bar  (3.75 psi)

Batteries: 

1 x 12v - 2200mAh Ni-MH battery pack

Battery Life: 

Greater than 500 charging cycles (2 - 5 years depending on usage)

Environmental protection:

 

(Airflo 12 housing)

 

IP51 (Protection against large dust deposits & vertical falling drops  

   

of water)

 

(Push-button hand control)

  IP67 (Totally protected against dust & immersion in water)

T

ype BF equipment

This equipment has been tested and meets the requirements of current EMC legislation

Charger: 

Model number

 

- HX1506SR

Input: 

AC 100v  - 240v,  50-60Hz, 0.5A Max

Output: 

DC 15v, 0.35A

Class II Double insulated equipment

Check  that  there  are  no  kinks  in  the  air 

hose.

This  happens  when  the  compressor’s 

internal temperature cut-out has tripped. 

Leave the Airflo

 

12 for 60-90 minutes to 

cool.

Bottom  Battery  Status  Indicator  light 

flashing ‘Red’.

Compressor causes electrical 

interference with another piece of 

electrical equipment.

Move  either  the  compressor  or  other 

item further away from each other until 

the interference stops.

Specifications

Summary of Contents for Airflo 12













Reviews: