Simple solutions for everyday independence
Airflo
12
3
Standard Package Contents
- fig.
1
1 x Airflo
12
compressor (
A
) fitted with a 12v -
2200mAh NiMH battery pack.
1 x Battery charger (with adaptors) (
B
).
1 x 2-Way hand control (
C
)
1 x User Instructions.
1
Battery Status Indicator
Getting Started
The Airflo 12 does not have an ‘on/off’ switch. To
operate the compressor, press the ‘Up’ button
on the Airflo or on the hand control.
Up
Down
A
B
C
NOTE:
The battery must be put on charge immediately as soon as the red indicator light appears.
Running the Airflo 12 on RED until the battery is exhausted will damage the battery.
When the compressor is running, the battery status indicator lights will only indicate the state of
battery charge as it was at the start of the lift. When the compressor stops running, the battery
status indicator will show a bottom green light (this will be red if the battery charge has become
low). To determine the true battery state following a lift, press the ‘Battery Status Indicator’ button
and the lights will indicate the battery charge state.
IMPORTANT: To maximize the life and lifting performance of the battery, fully recharge the
battery for 16
hours. When the battery is new, it will not reach its peak performance and
capacity until it has been discharged and recharged at least 3 to 5 times.
Fully charge the battery for a minimum of 16 hours before using the Airflo 12 for the first time
and when a new battery has been fitted.
To determine the battery charge state before use, press the ‘Battery Status Indicator’ button to
activate the battery status indicator lights:
RED
Recharge
Immediately
GREEN
OK to Use
GREEN
OK to Use
GREEN
OK to Use
GREEN
OK to Use
Battery Status
Indicator
Button
