PRECAUTIONS
Water resistivity
We put a lot of attention on making the LANC controller to be as much water resistant as possible, while maintaining its reasonable price.
However we cannot guarantee 100% water resistance under all circumstances and you should avoid using the controller under heavy environment
conditions like rain and over 95% humidity level.
High temperature
Avoid temperatures exc70°C – especially do not leave the controller exposed for direct contact with heavy sun shines, e.g. in the car parked in
sunny place.
Electrical precaution
The cable is always one of the most easy breakable element of any electronic system, especially when as exposed to mechanical wear off.
Therefore to extend the life of your controller and make the basic “repair” as cheap as possible we decided to allow easy cable exchange.
However, to avoid accidental short circuiting the camera LANC connection, you must remember to always plug the cable to the controller first.
We advise you to not to remove the cable from the controller, if it is not necessary.
OPERATING SPECIFICATIONS
Operation temperature range
-20° - +70°
Storage temperature range
-30° - +80°
Humidity rel. (non condensing)
max. 95%
Power consumption
0,07 W
Power supply from the camera
5,3V – 6V
DISCLAIMER
The information contained in this document is subject of change without notice.
Manfrotto makes no warranty and shall not be liable for any errors on information contained in this document.
LANC stands for Local Application Control Bus System and is a trade mark of SONY corp.
7
