M&R Sportsman EXG 14/12 Manual Download Page 25

Page: 25 / 98

M&R Companies 440 Medinah Road Roselle, IL 60172 USA

Tel: +630-858-6101 Fax: +630-858-6134

www.mrprint.com

| store.mrprint.com

V.050316

Flash Units

are used to select individual print stations to operate as

Flash

cure stations. To select print stations

for flash unit operation press the indicator representing the print station selected to operate as a

Flash Unit

. The

color changes from blue to orange.

In the illustration, print stations numbers 2, 7 and 10 have been selected to operate in the

Flash Unit

mode. To

return a print station to standard print operation, press the indicator once again and the print station will return to
normal print operation.

Press

Quartz

to access the

Quartz Flash

menu. Select the

Flash Time

Preheat Off

and

Delay

times. Select the

print stations to operate as Quartz Flash stations by pressing the indication

In Any Head

to view the list of

possible selections. Possible selections include

In Any Head

Head # 1

Head # 2

Head # 3

Head # 4

Head #

Head # 6

Head # 7

Head # 8

Head # 9

Head # 10

Head # 11

Head # 12

and

Unload Station

Heads

is used to activate a print station. To select a print station, press the

Heads

button on the

Options

menu.

To activate a print station, press the head number button and the indication changes from red to green. The Print
station will not operate during printing if

OFF

is selected.

Press the button next to the head number on the

Heads

screen. If selected to

, the print station completes one

flood/print cycle.

If selected to

OFF

, pressing the button moves the index carousel up so that screen registration or placement may

be checked. Pressing the button again lowers the index carousel.

Park Position

On an active head, press the

Park Off

button to raise the floodbar. The screen now displays

Park Rear

. Press

Park Rear

to move the print carriage to the front position and the screen now displays

Park Front

. Press again to

turn

Park Off

. The print carriage returns to the rear position and the floodbar moves down.

Note

: To move the flood bar down and return the print carriage to the rear at any time, press the

RESET

button on the control panel.

Summary of Contents for Sportsman EXG 14/12



































































































Search results

Summary of Contents for Sportsman EXG 14/12

Reviews:

Related manuals for Sportsman EXG 14/12

Brands by name

Popular brands

M&R Sportsman EXG 14/12, Manual

Search results

Summary of Contents for Sportsman EXG 14/12

Reviews:

Related manuals for Sportsman EXG 14/12

Brands by name

Popular brands