16
M&R Companies 440 Medinah Road Roselle, IL 60122 USA
Tel: +630-858-6101 Fax: +630-858-6134
V.050316
6.2 Main Control Panel
Number
Name
Function
1
Left LASER
Used to install pallets and position garments. Switch on back of control
panel turns on LASER.
2
Operator
Interface
Used to display information regarding operational, programming, and
system status messages. Refer to the Operator Interface section of
this manual for a detailed description of the operation.
3
Index On
Indicator Light
Red light illuminates when the index table is aligned with the index
cam follower on the lower index plate. Apply sideways pressure to the
pallet arm to make sure the index fork clevis has fully engaged the
cam follower.
4
Reset Button
The green Reset button resets the control system logic in the event of
an emergency stop or activation of one of the cycle interruption cords.
This button is also used to lower the index table during setup
procedures and activate Sensor Search Mode to return heads to the
start position based on the established print stroke length.
5
Emergency
Stop Button
The red Emergency Stop button stops all operation.
Press the button in until it remains depressed to activate.
Turn the button clockwise until it pops out to deactivate.
6
Power On/Off
Switch
Turns the press
ON
and
OFF
.
7
Right LASER
Used to install pallets and position garments. Switch on back of control
panel turns on LASER.
