M&R Sportsman EXG 14/12 Manual Download Page 17 | Manualshive

Page: 17 / 98

background image

M&R Companies 440 Medinah Road Roselle, IL 60172 USA

17

Tel: +630-858-6101 Fax: +630-858-6134

www.mrprint.com

| store.mrprint.com

V.050316

Number

Name

Function

8

Print Start

Switch

Print Finish

Switch

Use when starting or finishing a print run. This eliminates the need to
individually turn print stations On or Off. Placing this switch in the Print
Start position sets each print station in the On position to print
sequentially at the start of a print run. When this switch is in the Print
Finish position each print station in the On position will shut down
sequentially at the end of a print run.

9

Automatic

Manual Switch

This switch commands the system to operate in either the Automatic or
Manual mode of operation. To operate the index system one complete
cycle, press the switch down to Manual. The switch does not stay in
the Manual position, but returns to the middle or Off position when
released. The index system will cycle one time, along with any print
stations that are selected to On.

Placing this switch in the Automatic position while the index table is in
motion commands the index system to operate in the Automatic mode.
The Index time (dwell) for Automatic operation is adjusted via the
Operator Interface.

Note: When the switch is moved to the middle or Off position, the
index system will not operate.

6.2.1 Operator Interface

The Operator Interface is used to access and adjust all functions of the press. When electrical power is turned on,
the M&R screen displays. Press

Main

to view

Main

menu. The available menu selections are

Heads

,

Servo

,

Print Run

,

Revolver Mode

,

Tests

,

Production Data

,

Service Data

,

Date/Time Language

and

M&R

Info

.

Displayed along the bottom of the message screen are

Main

,

Counter

,

Timer

,

Option

and

Alarms

.

If the

Alarms

button is flashing, press the

Alarms

button to access the

Alarms

screen to view the alarms. To

return to the

Main

menu, press the

Back Arrow

.

M&R Info

Press the

M&R Info

button on the

MAIN

screen. The

M&R Info

screen contains information on how to contact

M&R Printing Equipment and program information.

If your equipment has the optional Password Protection programming installed and an alarm is displayed, press
the

Time Out Password

button for instructions and contact M&R Printing Equipment, Inc. for a password.

When the

Revolver Mode

is selected all screens will display the word Revolver vertically on the left and right

margins of each display screen.

«
...
15
16
17
18
19
...
»

Summary of Contents for Sportsman EXG 14/12



































































































Reviews:

No comments

Related manuals for Sportsman EXG 14/12

Brand: GE Pages: 43

Brand: GE Pages: 37

Brand: GE Pages: 210

Brand: GE Pages: 160

Brand: GE Pages: 146

Brand: GE Pages: 6

Brand: GE Pages: 27

Brand: GE Pages: 4

AJSPD850P - P2 DECK

Brand: Panasonic Pages: 73

Brand: HAMAR LASER Pages: 49

Brand: DAKO Pages: 25

Brand: 3M ESPE Pages: 50

Brand: VACGEN Pages: 13

Pro Vantage 12+ Series

Brand: Ecco Pages: 6

Brand: IDEAL Networks Pages: 10

Brand: Raytheon Pages: 68

Brand: KegLand Pages: 23

SimMan 3G Trauma

Brand: laerdal Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands