background image

Operation panel function illustrate

Lift the handle parallel to the operation panel,

you can end the "rear wash" and "women wash"

Rear wash

Stop

Women wash

Operation method

When someone is seated and sensed by the seat, 

lift the handle up and the nozzle extends to start 

the rear washing function; The water flow 

changes with the rotation of the handle; After the 

rear wash, lift the handle down until it is parallel 

to the operation plane. (There will be a sense of shifting, 

accompanied by a "click" sound)

The rear wash is a stream of air bubble water with massage function 

for a gentle and comfortable experience.

When the seat does not sense someone sitting, lift the handle up 

to open the rear wash, the nozzle will not extend out, but only water 

come out from the self-cleaning mouth, and with “beep” alarm.

When someone is seated and sensed by the seat, 

lift the handle down and the nozzle extends to 

start the women washing function;The water flow 

changes with the rotation of the handle; After the 

women wash, lift the handle up until it is parallel 

to the operation plane. (There will be a sense of shifting, 

accompanied by a "click" sound)

The women wash is a stream of air bubble water with massage function 

for a gentle and comfortable experience.

When the seat does not sense someone sitting, lift the handle down 

to open the women wash, the nozzle will not extend out, but only 

water come out from the self-cleaning mouth, and with “beep” 

alarm.

16

Summary of Contents for E107C





























Reviews: