1、Cleaning nozzle
a、
Use your forefinger to hold the
bottom of the nozzle and gently pull out
the nozzle; use a soft cloth, sponge or
small brush to apply neutral detergent;
b、Gently hold the nozzle and wipe the
nozzle and sprayer
c、Put back the nozzle, switch to rear or
women wash, clean the detergent and
dirt with self-cleaning water.
2、Cut the power supply
Unplug the power plug
before cleaning the product
body.
Product cleaning
Cleaning steps
Function description
1、Seat detection
There is a seat detection switch on the toilet seat, used to detect whether a
person is seated when the power is on. When the person is seated, the
"rear wash" and "women's wash" functions can be turned on; When the seat
does not sense someone sitting, turn on above functions, the nozzle. will
not extend out, but only water come out from the self-cleaning mouth, and
with “beep” alarm. When the product is powered off, the seating detection
does not work, the warm water washing functions and heating seat function
cannot be used, but only normal temperature water with "rear wash" and
"women wash".
2、Nozzle self-cleaning
Before the "rear wash" and "women wash" functions starting, the nozzle is
self-cleaning, and then the nozzle is extended to start the "rear wash" and
"women wash" functions;When the seat does not sense someone sitting,
turn on rear wash and women wash functions, the nozzle will not extend
out, but nozzle will start self-cleaning and machine with “beep” alarm.
3、Protected against low temperature burns
When the seat is sensed, it is heated to a comfortable 37.5 ℃; After the
temperature reaches to 37.5 ℃, the seat will automatically cool down to 33 ℃
to prevent low temperature burns;
18
