1.Applicable water pressure
range:0.075-0.8M
Pa
2.Applicable water
temperatur
e range:
4-35℃
3.Usage envir
onment 0-40℃,
relativ
e humidity≤95%;
4.The new hose must be used. The
old hose assembly cannot be
reused.
In the same room where this
product is installed, you need to
install a water stop valve within
easy reach. It is used in emergency
situations to cut off the water inlet
of the product without the use of
tools. Otherwise, unexpected
failure of the product may cause
user loss
Built-in filter
Built-in filter
Bottom inlet water supply
Side inlet water supply
Connector power:
Separate water and
electricity installation
locations
Warning
Connect power and water
Connect the external water source to the
water inlet connector with the supplied
hose and filter
Connect the external water source to the
water inlet connector with the supplied
hose and filter
1.220V (greater than 10A) socket installed
at a position 50cm above the ground.
2.The socket must be installed in a place
where water cannot easily splash.
3.Use a grounded socket.
4.Plug the power plug of the
product into the socket.
The plug should be connected
to a valid grounded socket,
otherwise it may cause
electric shock in the event
of power failure or leakage.
Please connect the power
according to the product
power supply requir
ements,
Otherwise it may cause the product
to malfunction.
Notice
Notice
Notice
13