23
Pull the socket of burner box over the radiant pipe. By default, the burner box shall be fitted onto the
tube in vertical position, i.e. with the neck for air intake located on the top. If the burner cabinet cannot
be in this position and needs to be turned, it is necessary to consult MANDÍK, a.s. Secure the burner
cabinet after mounting by hanging it by the eye in the back of the cabinet so that the housing neck and
the radiant tube are coaxial. Put the GBS clamp over the socket like when connecting radiant pipes and
tighten it firmly. The recommended torque is 25 Nm. Connect the burner and the exhaust box with the
supplied cable, which, in the I version, is guided by an armored tube placed in the hinges.
Tube 102x2
GBS Clamp
Pull the socket of burner box over the
pipe to stop and lock it with GBS clamp
GBS Clamp
Burner box
In the same way as the burner box, the exhaust box is installed and secured too. It can be angled with
the output neck facing the side or top freely. However, it cannot be angled down.
Push to the pipe socket to stop and
lock with clamp and with tenon
Exhaust box
Clamp
Tube 102x2
black
Summary of Contents for HELIOS
Page 1: ......
