REDDI-LYNX Operator’s Manual
Page 5
Mandako Agri Marketing (2010) Ltd.
2.3 EQUIPMENT SAFETY GUIDELINES
• Safety of the operator and bystanders is one of the
main concerns in the design and development of
equipment. However, every year many accidents
occur, which could have been avoided, by a few
seconds of thought and a more careful approach to
handling equipment.
• You, the operator, can avoid many accidents by
following the precautions in this section. Insist that
those working with you, or for you, follow them also.
• Replace any safety or instructional signs that are
missing or illegible. The location of these safety signs
are indicated in this manual in Section 2.12.
• Never use alcoholic beverages or drugs which can
hinder alertness or coordination while using this
equipment. Consult your doctor about using this
machine while taking prescription medications.
• Under no circumstances should young children be
allowed to work with this equipment.
• The operator should be a responsible, properly
trained and physically able person. They should be
familiar with machinery and trained in this
equipment's operations.
• If the elderly are assisting with work, their physical
limitations need to be recognized and
accommodated.
• If the tow vehicle is a tractor, it should be
equipped with a Roll Over Protective
Structure (ROPS) and a seat belt.
• Never exceed the limits of the REDDI-LYNX. If its
ability to do a job, or to do so safely, is in question -
DON'T TRY IT.
• Do not modify the equipment in any way.
Unauthorized modification may impair the function
and life of the equipment, and may result in serious
injury or death.
2.4 SAFETY DECALS
2:4:1 General Information:
• Keep safety decals clean and legible at all times.
• Replace decals that are missing or have become
illegible.
• Replaced parts that displayed a safety decal should
also display the current sign.
• Safety decals displayed in Section 2.11 each have a
part number located below the sign. Use this part
number when ordering replacements.
• Safety decals are available from your authorized
Distributor or Dealer Parts Department.
NOTE:
Call Mandako directly if you are unfamiliar with who your
local Dealer/Distributor is.
2:4:2 How to Install Safety Decals:
1. Be sure that the installation area is clean, dry and
degreased.
2. Be sure temperature is above 50°F (10°C).
3. Determine exact position before you remove the
paper backing. (See Section 2.12)
4. Remove the smallest portion of the split backing.
5. Align the decal over the specified area and carefully
press the small portion with the exposed adhesive in
place.
6. Slowly peel back the remaining paper and carefully
smooth the rest of the decal in place.
7. Small air pockets can be pierced with a pin and
smoothed out using the piece of the paper backing.
