REDDI-LYNX Operator’s Manual
Page 22
Mandako Agri Marketing (2010) Ltd.
3.8 FIELD TO TRANSPORT CONVERSION
The REDDI-LYNX is designed to be easily converted from
transport to field configuration with minimal effort.
Follow this procedure:
1. Lift the roller using the three point hitch assembly.
2. Clear the area of bystanders, especially small
children.
3. Make sure the stabilizer jacks are raised and
secured. Fig 25 & 26.
4. See transport operation. 3.9
7. Make sure the SMV (Slow Moving Vehicle) emblem,
all lights and reflectors, that are required by local
highway and transport authorities, are in place.
Check that they are clean and can be seen clearly by
all overtaking and oncoming traffic.
8. It is not recommended that the machine be
transported faster than 32 kph (20 mph).
See Section 3:7:6 for recomended operation speed.
9. Always use hazard flashers on the tractor when
transporting unless prohibited by law.
3.9 TRANSPORT
The Mandako REDDI-LYNX is designed to be easily and
conveniently moved from field to field.
When transporting, follow this procedure:
1. Be sure all bystanders are clear of the machine.
2. Be sure that the pins on the three point hitch are
securely attached to the tow vehicle.
3. Convert to transport configuration
Refer to Fig.22
IMPORTANT:
When raising the frame for tranportation
be conscious of ballast weights (Table 2)
4. Raise the three point hitch to its fully up position.
5. Do not allow riders on the implement.
6. Keep to the right and yield right-of-way to allow faster
traffic to pass. Drive on the road shoulder, if
permitted by law.
Fig. 25 Lowered Stabilizer Jack
Fig. 26 Raised Stabilizer Jack
