REDDI-LYNX Operator’s Manual
Page 23
Mandako Agri Marketing (2010) Ltd.
3:10:2 REMOVE FROM STORAGE:
When removing this machine from storage, follow this
procedure:
1. Clear the area of bystanders, especially small
children.
2. Attach the machine to the tractor (See Section 3.5).
3. Make sure three point hitch pins are all secured
properly.
4. Lubricate grease fittings as per Section 4.2
5. Replace any worn or defective parts.
6. Go through the Pre-Operation Checklist before using
machine. (See Section 3.3)
3.10 STORAGE
3:10:1 PLACE IN STORAGE:
At the end of the season, the machine should be
thoroughly inspected and prepared for storage. Repair or
replace any worn or damaged components to prevent
unnecessary down time at the beginning of the next
season.
Follow this procedure before storing:
1. Remove all entangled material.
2. Thoroughly wash the unit with a pressure washer or
water hose to remove all dirt, mud or debris.
3. Lubricate all grease points as per Section 4.2.
Ensure all grease cavities have been filled with
grease to remove any water residue from washing.
4. Touch up all paint nicks and scratches to prevent
rusting.
5. Select an area that is dry, level and free of debris.
6. Move the machine to its storage area.
7. Lower stabilizer jacks.
8. Place planks under the jack for added support if
required. Chock the drum to prevent rolling.
9. Unhook the machine from the tractor.
(See Section 3.5)
Fig. 27 Lowered Stabilizer Jacks for Storage
