Maintenance and Care
75
Carefully read these Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
8.4
Maintenance work
8.4.1
Engine oil change
WARNING
Risk of injury due to hot oil
Engine oil gets hot during operation and causes scalding if touched.
For this reason:
S
Only touch the oil drain screws using protective gloves.
User tip
Use a container with a capacity of at least 100 litres for the oil change.
User tip
Replace the oil filter inserts each time the engine oil is changed.
Drain engine oil
Drain engine oil with engine at operating temperature.
1. Loosen the oil filter cover
1
and unscrew by
2-3 turns.
The engine oil then flows out of the oil module into
the oil pan.
3. Position the container below the oil drain plug
2
.
4. Unscrew the oil drain plug
2
at the oil pan
and allow all the oil to drain.
5. Screw the oil drain plug
2
back in with a new
sealing ring and tighten it.
Tightening torque
80 Nm
. . . . . . . . . . . . . . . . . . . . .
