14
Valkenpower bv. adheres recommended for carrying out all inspections presribed by law.
Checkpoint:
Okay
Not
okay
Not okay, solution:
Remarks:
Check the body of the jack for signs of wear and tear,
cracks and deformation, pay special attention to the
corners and jaws of the clamp.
Put the lift out of use immediately / replace entirely.
Check the handle for signs of wear and tear, cracks
and deformation.
Put the lift out of use immediately / replace the handle.
Check the hydraulic cylinder for leakages.
Put the lift out of use immediately.
Check the oil level in the cylinder.
Add oil if necessary with Falco CH46-V hydraulic oil.
Check if the springs (H+L) are sufficiently tensioned
and are not stretched or broken.
Put the lift out of use immediately/ replace the spring (5).
Check if the locking system works correctly.
Put the lift out of use immediately/adjust the locking sytem.
Check all components for signs of wear and tear, dirt
and dust.
Clean the lift and make sure there are no sign of dangerous
wear and tear.
Check if all moving parts are sufficiently lubricated.
Lubricate the parts.
Standard periodically maintenance protocol
