16
5. For
“O”-shape, “U” shape , or with multiple lawns, we recommend you to set the RTK reference
station the roof or wallas shown below. Also notice that the RTK Reference Station should not be
covered by the roof or the concrete wall of the building;
6. For
“L”-shape and the lawns on one side,and some “U” shape lawns, you can both set the reference
station in the lawn or on the roof&balcony. Please notice that the transmission path between working
area and the reference station should not be fully obstructed.
4.3 Find a Good Place to set Charging Station
Note
：
1.
The charging plate of the charging station must not be bent.
2. Put the charging station on a level surface.The max. tilt distance of charging plate is 2cm;
3. Put the charging station (A) were the docking point (B) has open-sky view. This means that 90
°
of
the sky in all directions must be unblocked. The charging station docking point (B) is 2m. in front of the
charging station.
