28
7. Start Mowing
Note:
1. Make sure the height of grass in your lawn is Max.10cm. If the grass height in your lawn is higher than 10cm,
please cut the grass to less than 10cm first.
2. If the grass height is higher than 60mm, we recommend you to set the knife height higher than 40cm, please make
sure that each time, only about 1/3 height of the grass is cut(e.g. if your original grass height is 60mm,set the knife
height of LUBA 40 or 45mm; if your original grass height is 9-10mm,set the knife height of LUBA 60mm;)
3. If any unexpected issue occurs, press the STOP button and lock LUBA. The STOP button has the highest priority.
4. When LUBA meet obstacles higher than 10cm,the ultrasonic sensor will detect the obstacle, the speed of LUBA will
slow down, and continue mowing forwards, until the bumper touch the obstacle and then do the avoidance. This can
avoid the frequent trigger of the “obstacle avoidance ” by high grass.
5. If the lift sensor is triggered, LUBA will stop, please press grass cutting button and then start button to unlock
LUBA.
6. If a task is already set, LUBA is doing the task automatically, press Auto-return button and then start button to call
back LUBA.
7. Please mow your task area no more frequent than once a day. Too frequent mowing may do harm to your lawn.
8. The estimated task time is not accurate in this version ,please just ignore that.
How to start mowing:
The map is already set, now you can choose “Start task”, or set a task schedule for LUBA about the task with this
area.
If you choose “Start task”, please set the task parameters and make sure that your LUBA is in the task area.
If you’d like to set a task schedule, please click the “schedule” button and set the task parameters
Set the key parameters of the task:
Knife height: from the ground to knife.( e.g. if your grass is 80mm high, you set knife height as 60mm, then20mm of
the grass will be cut);
Route Mode: we currently support single grid and double grid mode. We recommend the double grid mode.
Time: set the time when your LUBA begin to woek, the frequency should not be more than once a day.
Response to rain: when rain, the rain sensor of LUBA will be triggered and go back to the charging station. And
abandon the work this time, the next time of your schedule, LUBA will work as usual.( The logic of rain sensor is still
optimizing);
