Magnifier
Focusing Hood
l
Changing the magnifier
l
Detaching
Attaching
While holding both side panels of the focus-
ing hood to prevent lowering of the magni-
fier base plate, turn the magnifier counter-
clockwise, and at the point where the white
dot on the magnifier becomes aligned with
the while dot on the base plate, remove the
magnifier.
After aligning the magnifier white dot with
the base plate white dot, mount another
magnifier by turning it clockwise.
* In addition to the standard (-1.3) diopter
lens, available are +1, 0, -1, - 2, and -3
diopter lenses (six in total].
While pressing the focusing hood latch (9),
slide the nameplate (8) to the right as viewed
from the front, and remove the focusing hood
while slightly raising its front portion.
Insert the two prongs (21) on the back of the
hood into the slots on the camera body, and
while pressing the hood front portion toward
the camera body, return the nameplate to
Its original position. The latch will pop out
and the hood will be locked automatically.
32
