background image

 Multiple Exposure Photography

 

When desiring to wind up to the end of film while unexposed film

remains in the holder.

W h e n   t h e  multiexposure  lever of the roll

film holder is moved forward, the coupling

pin for double-exposure prevention is dis-

engaged, and whenever the shutter cocking

lever is set, shutter releasing can be re-
peated without limit.

 The multiexposure lever can be changed

over  before or after shutter cocking, and

also before or after shutter releasing for the

first multiple exposure photograph.

 When taking multiple exposure pictures

is finished, never fail to return the multiex-
posure  lever to its original position; other-

wise, failure in taking subsequent multiple
exposure pictures will occur.

Storing the dark slide

When the film advance lever is continuously
wound, with the film wind-stop release lever
(42) pushed to the left, the film can be reeled

up completely to its end, even though pic-
ture taking is still in progress and a film

remains unexposed.

While progressing with photography, the

dark slide of the roll film holder can be
stored by inserting it into the camera body

side.

Memo clip

Summary of Contents for RB67 Pro S









































Reviews: