l
Aligning the starting mark
Move the film advance lever gently, until
the starting mark (arrow) of the leader paper
aligns with the starting mark of the holder.
The film advance lever can be moved in
several short, definite strokes.
If the leader paper is pulled too far, the
film may become fogged. Be careful not to
go beyond the starting mark (arrow).
l
Attaching the film insert
l
Film winding for first exposure
1. Put the insert into the cassette, aligning
the top side of the insert with the white dot
(A) of the cassette.
If the film insert is attached in reverse,
the back cover cannot be closed.
2. Close the back cover and fully push in
the back cover latch while pressing the
back cover.
NOTES
1. The outer cassette of the Pro-S roll film
holder can be used for both 120 and 220
film inserts.
2. The film insert of the Pro-S roll film holder
cannot be attached to the outer cassette
of the former RB67 roll film holder.
By winding the film advance lever until it
stops, the figure “1” will appear in the expo-
sure counter (39), the red mark indicating
incomplete film winding will disappear, and
the film will be positioned for the first expo-
sure
* Unless film winding from S to 1 in the
exposure counter is completed, the shutter
cannot be released.
19
