Mamas & Papas Vito, Instructions For Safe Use

Page: 21 / 48

21
27• release, from the back, the safety harness straps and pull
them away from the front;
28• release, from the back, the shoulder pads and pull them
away from the safety harness from the front;
29• Slip off the adjuster strap (fig. a) and then remove the
headrest from above (fig. b).
30• unfasten, from underneath the frame, the buckle of the leg
divider strap (fig. a) and extract the strap from the pad of
the leg divider (fig. b);
31• pull the lining upwards to remove it, checking that the
strap goes through the opening.
Maintenance of the padding
Brush the fabric parts to remove dust.
• Machine wash at a maximum of 30°C with a delicate wash
setting and short spin cycle.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
Do not remove stains with solvents.
• Do not tumble dry.
30
°
How to replace the lining on the Vito car
seat
To replace the lining of the Vito car seat:
32• insert the safety harness from underneath the frame and
thread them through the openings at the base of the seat.
Insert the strap in the lining of the leg divider;
33• attach it to the opening in the frame
34• attach the strip to the attachment point of the leg divider strap
35• thread the lining starting from the seat and moving
upwards, paying attention to the shape of the backrest.
36• Thread the head rest – make sure the red strip is passed
through the opening in the fabric.
• Thread the shoulder straps in the safety harness.
37• Insert the safety straps in the seat in this order: begin with the
buckle of the shoulder straps and then deal with the straps.
38• extend the straps and insert them in the seat’s frame (the
straps in the upper hole, the buckle in the lower one).
39• fasten them properly in the back, as shown in the picture.
• fasten the safety harness straps (point 17)
IMPORTANT: the straps must not be twisted around.
40• ATTENTION: The central adjustment strap must pass
between the body and the plastic shield, as shown.
41• fasten them to the back attachment point, threading them
behind the instructions tray.
• apply the booster seat if the baby is still small.
Serial numbers
42• The name of the product, production date and serial number
of the Vito can be found under the seat.
43• The approval label of the Vito is behind the backrest.
44• Production date of the strap.
This information is required for any complaints.
Product cleaning
• This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by adults.
• Keep all moving parts clean and if necessary lubricate
them with light oil.
• Clean the plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device with
solvents or other similar products.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
How to read the approval label
• This paragraph explains how to interpret the approval label
(orange label).
• The label is double because this car seat is approved for
two types of installation in cars:
• ISOFIX attachment systems (the term SEMI-UNIVERSAL
class A indicates compatibility of the car seat with vehicles
fitted with this system).
•
Attachment systems using static or inertia-reel three-point