S
T
E
P
3
0
With the help of another
person, lift the dresser
upright.
Align the cam studs in
the left and right
changing rails (
15
&
16
)
and the dowels in top
back section (
12
), back
changing rail (
13
) and
the front changing rail
(
14
) with relevant holes
and slot them together.
Tighten the two carcass
cams in the back of the
back changing rail (
13
)
using a flat-head
screwdriver.
Screw in six assembly
bolts (
P
) through the
holes in the left and
right changing rails
(
15
&
16
) and tighten
them into the top using
the allen key (
R
).
S
T
E
P
2
9
Slot three carcass cams
(
M
) into the large holes
in the underside of the
top back section (
12
).
Note
: Carcass cams have
a narrower head than
the drawer cams (
B
)
supplied in the fittings
pack.
Tighten the carcass cams
using a flat-head
screwdriver.
Insert two carcass cams
(
M
) into the large holes
in the rear face of the
back changing rail (
13
).
Do no tighten the cams.
Attach the wall strap (
Q
)
to the rear face of the
changing back rail using
the screw and washer
supplied.
B
16
15
P
R
14
13
13
12
Q
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor