S
T
E
P
1
8
Screw four cam studs
(
C
) into the holes in the
underside of the top (
9
),
see diagram
. Tighten
them using a cross-head
screwdriver.
Note:
If you are not
going to use this product
as a changing station fit
the wall strap as shown.
Attach the wall strap (
Q
)
to the back of the top
using the washer and
screw provided.
If you are going to use
this item as a changing
station attach the wall
strap later as shown in
step 29 (
page18
).
S
T
E
P
1
7
Carefully turn the
assembled components
over, so that the front
edge of the dresser
carcass faces down,
see
diagram
.
Align the cam studs in
the left side panel (
6
)
and the dowels in the
bottom rails with the
relevant holes and slot
them together.
Tighten the two carcass
cams (
M
) in the left side
panel using a flat-head
screwdriver to securely
attach the components.
6
9
M
C
7
Q
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
