S
T
E
P
2
2
Fasten the back panels to
the side panels and the
back bottom rail using
the 32 nails (
N
). Use a
light hammer to drive in
the nails,
see diagram.
S
T
E
P
2
1
Before fixing the back
panels to the dresser
you will need to check
that it is square.
To do this, measure from
the bottom corner of
one side panel to the top
corner of the opposite,
A
to
A
,
see diagram
.
Now measure the
opposite diagonal,
B
to
B
. If the measurements
are unequal then the
dresser is not square.
To square the dresser,
gently push the top
corner of the longest
diagonal towards the
shortest top corner and
re-measure. Continue
until equal (a 2-3mm
difference is acceptable).
N
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor